Center for Facilities Maintenance & Hardware

Schedule 51V

This schedule is a hot contract area, utilized by federal agencies hard-good items typically found in retail and wholesale outlets. This includes Lawn Mowers, Tractors, Utility Vehicles, Edgers, Trimmers, Tillers, Spreaders, Sprayers, Vacuums, Sweepers, Snow Blowers and Throwers, Cattle Guards, Chain Saws, Parts and Accessories, Household and Office Appliances, Tools, Tool Kits, Tool Boxes, Woodworking and Metal Working Machinery, Related Leasing and Rentals, Paints, Sealants, Adhesives and Lubricants. Sales in this area are expected to exceed $500 million in FY2005.

CONTRACT AREAS (SPECIAL ITEM NUMBERS)

Appliance Department

639 001 DOMESTIC - Commercially available products and accessories from appliance vendors to include, but not limited to refrigerators, freezers, microwaves, ranges, clothes washers, clothes dryers, laundry centers, dishwashers, window, wall, ceiling air conditioners, portable air conditioners, water coolers, drinking water dispensers, air purifiers, circulating and ceiling fans, evaporative air coolers, combination appliances, etc. (Note: these could be shippped overseas also.)

639 002 EXPORT - Commercially available products and accessories from appliance vendors (electrical requirements not used in the United States .)

639 003 SERVICES - Ancillary services such as, but not limited to - extended warranty, installation and removal or replaced products, leasing, rental and trade-ins.

639 99 Introduction of New Products/Services (Directly related to items accepted under this department)

Coatings, Adhesives, Fuels, and Lubricants

834 100 AEROSPACE COMMERCIAL COATINGS, ADHESIVES, AND SEALANTS including topcoats, primers, film adhesives, composite repair materials, pre-treatment products, thinners and related products designed primarily for, but limited to use in the manufacture, repair, routine maintenance, or prevention of the formation and propagation of corrosion on aircraft, helicopters, missiles, or vehicles designed to travel outside earth's atmosphere. Anti-seize compounds and materials to convert oxide corrosion to protective coatings. Products containing either lead or chromate must be prominently and properly identified and labeled. Product may be a kit or require multi-component system application. Application accessories and equipment may be included. Technical support or training that is normally provided with commercial sales

834 200 MARINE COMMERCIAL COATINGS, ADHESIVES AND SEALANTS - Including topcoats, primers, pre-treatment products, thinners and related products designed primarily for, but limited to use in the manufacture, repair, routine maintenance, or prevention of the formation and propagation of corrosion on marine vessels, oil drill platforms, navigational aids, component parts and structures intended for exposure to a fresh or salt water marine environment either above or below water. Anti-seize compounds, preservatives for wood, metals, plastics or textiles, and materials to convert oxide corrosion to protective coatings. Products containing either lead or chromate must be prominently and properly identified and labeled. Application accessories and equipment may be included. Product may be a kit or require a multi-component system application. Technical support or training that is normally provided with commercial sales of this product may be included.

834 300 VEHICLE AND INDUSTRIAL COMMERCIAL COATINGS, ADHESIVES AND SEALANTS - Including topcoats, primers, pretreatment products, thinners, body fillers and related products designed primarily for, but not limited to use in the manufacture, repair, routine maintenance, or prevention of the formation and propagation of corrosion on, optical or electrical applications, equipment, vehicles, weapon systems and related miscellaneous parts. Anti-seize compounds, preservatives for wood, metals, plastics or textiles, and materials to convert oxide corrosion to protective coatings. Products containing either lead or chromate must be prominently and properly identified and labeled. Product may be a kit or require a multi-component system application. Application accessories and equipment may be included. Technical support or training that is normally provided with commercial sales of this product may be included.

834 400 ARCHITECTURAL COMMERCIAL COATINGS, ADHESIVES AND SEALANTS - Architectural commercial coatings, adhesives, and sealants including topcoats, sealers, fillers primers, pre-treatment products, thinners, and related products designed for, but not limited to, construction, repair, marking, maintenance, or prevention of the formation and propagation of corrosion on structural surfaces, or for joining structural members, in both interior and exterior applications for either commercial or residential structures, foundations and pavements. Coatings include both latex and alkyd paints for use on either wood or metal surfaces, anti-seize compounds, preservatives for wood, metals, plastics or textiles, coatings and sealers for concrete or asphalt pavements and materials to convert metal oxide corrosion to protective coatings. Products containing either lead or chromate must be prominently and properly identified and labeled. Product may be a kit or require a multi-component system application. Application accessories and equipment may be included. Colorants--Includes color pigments for on-the-spot custom tinting of paints by the painter.

834 500 Stains, Varnishes, Sealers, Shellacs and Lacquers - All commercial types and sizes. Low VOC compliant products containing no ozone depleting substances or hazardous air pollutants (HAPS) are preferred. Products containing either lead or chromate must be prominently and properly identified and labeled. Products should be identified when resistant to moisture, salt spray, hydrocarbons, or corrosives.

834 600 Coating Removers - All commercial types and sizes available for use on specified substrates. Low VOC, biodegradable and HAPS-compliant products containing no ozone depleting substances are preferred.

834 700 Applicators and Accessories - All commercial types and sizes for application of paints, varnishes and other coatings. This includes, but is not limited to: brushes, mitts, sticks, rollers, roller covers, conditioners, grids, and roller kits.

834 800 Recycled Latex Paint - Includes latex paint certified to meet or exceed the U.S. environmental Protection agency Recovered Material Advisory Notice (RMAN) standards for recovered materials as specified in the Resource Conservation and Recovery Act Section 6002 Comprehensive Procurement Guideline (CPG). "Consolidated" latex paint (100% recovered material) refers to that used to cover graffiti, where color and consistency of performance are not primary concerns. "Reprocessed" latex paint (2o% recovered material for white, off-white, pastel, 50-99% recovered material for grey, brown, earth-tones, dark colors) refers to that used for interior and exterior architectural applications.

834 900 Petroleum and Fuel - Solid fuels; liquid propellants, fuels, oxidizers, both chemical and petroleum base; fuel oils, cutting, lubricating, insulating, refrigeration, penetrating, vacuum pump. Tempering, metal quenching, and hydraulic oils; greases, such as automotive, graphite, ground glass join, heat dissipation, and high temperature lithium greases; miscellaneous fats and oils, such as fish, pine, fog, and storm oils; and waxes, such as sealing, bone, paraffin, ski, except for cleaning and polishing waxes.

Hardware Store Department

105 001 WALK IN/WALK OUT HARDWARE STORE COMMERCIAL PRODUCTS AND SERVICES, - Flooring, Fencing, Hardware, Building Materials, Tools, Appliance, electric, paint, plumbing, lawn/garden, motors, shop, machining, welding, material handling, carts/trucks, dock equipment, HVAC, cleaning, irrigation, and related systems.

105 002 CATALOG SERVICE HARDWARE STORE COMMERCIAL PRODUCTS AND SERVICES CATALOG - Flooring, Fencing, Hardware, Building Materials, Tools, Appliance, electric, paint, plumbing, lawn/garden, motors, shop, machining, welding, material handling, carts/trucks, dock equipment, HVAC, cleaning, irrigation, and related systems

Lawn & Garden Department

341 100 Mowers - including but not limited to walk-behind - gas, diesel, electric, rechargeable and self-propelled, slope, reel, all types of riding mowers, etc.

341 200 Mowing Implements, Tractor Drawn or Mounted - (To include but not limited to Rotary mowing units, Tractor mounted - all sizes; Rotary mowing units, Tractor Drawn or towed - all sizes; Flail mowing units - Tractor Drawn or towed - all sizes; Boom Mowers and Sickle Mowers

341 300 Tractors, Gas/Diesel without implements, lawn & garden dedicated - (Excludes tractors with attachments enabling multiple or general purpose use such as loading, excavation, agricultural, highway/road maintenance or clearing, mowing construction, etc.)

341 400 Various lawn & garden implements (not tractor-drawn or mounted). - To include but not be limited to: Roto-tillers, snow throwers/blowers, trimmers (grass/ hedge/tree), edgers, blowers, vacuums, sweepers, sprayers, renovators, spikers, sod cutters, broadcasters ,spreaders, seeders, etc.)

341 500 Cattle Guards - All Types

341 600 Chain Saws - All Types

341 700 Accessories/Replacement Parts - (Directly related to items accepted under this department (includes such things as lubricants, tools, etc.).

341 800 Hand Tools, specifically Lawn and Garden dedicated. - Including but not limited to: lawn sprinklers, soaker hoses, garden hoses, grass sheers, pruning sheers, tree trimmers, pruning saws, weed whip cutters, lawn rakes, garden rakes, spading forks, manure forks, brush hooks and garden hoes.

341 99 Introduction of New Products/Services - (directly related to items accepted under this Department).

Tools Department

612 099 Introduction of New Products/Services - (Directly related to items accepted under this department)

612 209 Tool Kits

550 001 Hand Held Tools, Powered - includes but is not limited to the following: Hammer Drills, Grinders, Routers, Sanders, Saws, Screwdrivers, Drills, Staplers, Nailers, Scribers, Torque Wrenches, Drivers, Riveters, etc.

600 001 Portable Tool Boxes, Cabinets and Chests

613 001 Hand Held Tools, Non-powered - Including but not limited to the following: Socket Wrenches, Screwdrivers, Saws, Riveters, Scalers, Microshavers, Air Regulators, Hammers, Drills, Grinders, impact Wrenches, Sanders, Polishers, Nutrunners, Air Vacuums, Sealant Guns, Nailers, Ratchets, Sockets, Screw Starters, Pliers, Nippers, Mallets, Punches, Chisels, Nail Sets, Cutting and Stripping Tools, Measuring and Set-up/Layout Tools, Automotive Specialty Tools, Connector Tools etc.

614 001 Accessories - (directly related to items accepted under this department)

616 001 Ancillary Services - Includes but is not limited to services necessary for make ready, start-up, operator instructions, training, consultation, and/or tool kit assembly/etching.

Woodworking & Metalworking Department

577 002 Maintenance of woodworking and metalworking machinery and equipment.

577 003 Accessories - (directly related to items accepted under this department)

577 099 Introduction of New Products/Services - (directly related to items accepted under this department)

577 001 Woodworking Machinery and Equipment - Including but not limited to: Lathes, Sanders, Sawing Equipment (Circular, Band, Radial Arm, Mitering, Table and Panel Cutting), Shaping and Surfacing Machinery

577 005 Metal Working Machinery & Equipment - Including but not limited to: Milling Machines, Engraving Machines, Arc/Wire/Heli-Arc Welders, Gas Welding and Cutting Equipment, Hydraulic Presses, Press Brakes, Shears, Drill Presses, Grinders, Engine Lathes, Metal Sawing Equipment etc.)

HOW WE CAN ASSIST YOUR FIRM

When retained, we provide turnkey contract services to our professional clients. We provide the research, business review, competitive analysis, submittal preparation, marketing preparation, and follow through sales actions to make this entire program a success. Under this program, our clients remain focused on their core business while opening up a new and profitable segment to their current operations.

The fee structure at Breen & Associates is designed to be performance oriented. This means that your costs are fixed and represents only a fraction of the costs your company would experience if they attempted entree on your own. Additionally, we guarantee that your company will be awarded under this contract (if you follow our recommendations for proposal submittal).

If you would like the opportunity to get your fair share of this contract worth nearly $500 Million, contact us today!